MSRP: $249.00
SUBMERSIBLE WATER PUMP
115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
Move slurry and dirty liquids without the worry of damaging the pump.
The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
Great for applications where space is tight.
No need to worry about the water level for the pump!
Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
Pump Type: Submersible Standard
Starting Type: Automatic
Casing: Stainless Steel
Motor (HP): 1/3
Voltage: 115
Starting amps: 10
Running amps: 4
Duty: Continuous
Motor insulation: Class F
Overhead protection: Built-In Thermal Automatic Reset
Discharge Type: Top
Discharge capacity: 40 gpm
Max. head (feet): 23
Port diameter ( inches): 1.25 FNPT
Maximum pressure: 10 psi
Solids handling: 0.375"
Impeller: Thermo Plastic Noryl
Seals: Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal
Cord length (feet): 20
Cord type: Heavy-Duty 115V
Dimensions (WxH): 6.4" x 10.3"
Pump diameter: 6.4"
Dry weight: 11 lbs.
Residential Warranty: 1 year
Commercial Warranty: 1 year
CA Compliant: Yes